[Constructing Features]
Constructed Point | Constructed_Point.htm
Constructed Line | Constructed_Line.htm
Constructed Plane | Constructed_Plane.htm
Constructed Circle | Constructed_Circle.htm
Constructed Cylinder | Constructed_Cylinder.htm
Intersection - Line and Plane | Intersection_Line_and_Plane.htm
Intersection - Two Lines | Intersection_Two_Lines.htm
Mid Point - Two Points | Mid_Point_Two_Points.htm
Projection - Point to Line | Projection_Point_to_Line.htm
Projection - Point to Plane | Projection_Point_to_Plane.htm
Corner - Three Planes | Corner_Three_Planes.htm
Cast Point - One Point | Cast_Point_One_Point.htm
Intersection - Two Planes | Intersection_Two_Planes.htm
Best Fit Line - Multiple Points | Best_Fit_Line_Multiple_Points.htm
Mid Line - Two Lines | Mid_Line_Two_Lines.htm
Projection - Line to Plane | Projection_Line_to_Plane.htm
Cast Line - One Line | Cast_Line_One_Line.htm
Best Fit Plane - Multiple Points | Best_Fit_Plane_Multiple_Points.htm
Mid Plane - Two Planes | Mid_Plane_Two_Planes.htm
Best Fit Circle - Multiple Points | Best_Fit_Circle_Multiple_Points.htm
Intersection - Plane with Cone or Cylinder | Intersection_Plane_with_Cone_or_Cylinder.htm

[Dimensioning Features]
Angle | Angle.htm
Distance | Distance.htm
True Position | True_Position.htm
Straightness | Straightness.htm
Flatness | Flatness.htm
Roundness | Roundness.htm
Cylindricity | Cylindricity.htm
Concentricity | Concentricity.htm
Length | Length.htm
Diameter | Diameter.htm
Cone Angle | Cone_Angle.htm
Width and Length | Width_and_Length.htm

[Getting Started: Gage Tutorial]
Step 1: Set Up Your Multi Gage Arm | Step_1__Set_Up_Your_Multi_Gage_Arm.htm
Step 2: Attach the Multi Gage Arm to the Computer | Step_2__Attach_the_Multi_Gage_Arm_to_the_Computer.htm
Step 3: Install PC-DMIS Multi Gage | Step_3__Install_PC-DMIS_Multi_Gage.htm
Step 4: Launch PC-DMIS Multi Gage | Step_4__Launch_PC-DMIS_Multi_Gage.htm
Step 5: Calibrate Your Probe | Step_5_Calibrate_Your_Probe.htm
Step 6: Measure a Few Features | Step_6__Measure_a_Few_Features.htm
Step 7: Construct Features from Measured Features | Step_7__Construct_Features_from_Measured_Features.htm
Step 8: Dimension the Measured Features | Step_8__Dimension_the_Measured_Features.htm
Step 9: Review the Report | Step_9__Review_the_Report.htm
Step 10: Print the Report | Step_10__Print_the_Report.htm

[Measuring Features]
Measured Point | Measured_Point.htm
Measured Plane | Measured_Plane.htm
Measured Circle | Measured_Circle.htm
Measured Cylinder | Measured_Cylinder.htm
Measured Cone | Measured_Cone.htm
Measured Sphere | Measured_Sphere.htm
Measured Round Slot | Measured_Round_Slot.htm
Measured Square Slot | Measured_Square_Slot.htm
Measuring a Reference Plane | Measuring_a_Reference_Plane.htm

[Multi Gage Interface]
Main Toolbar | Main_Toolbar.htm
Utilities Toolbar | Utilities_Toolbar.htm
QuickStart Window | QuickStart_Window.htm
Status Window | Status_Window.htm
History Window | History_Window.htm
Status Bar | Status_Bar.htm
Dimension Interface | Dimension_Interface.htm
Measured Feature Interface | Measured_Feature_Interface.htm
Constructed Feature Interface | Constructed_Feature_Interface.htm
Progress Bar | Progress_Bar.htm
QuickStart Buttons | QuickStart_Buttons.htm

[PC-DMIS Multi Gage]
Introducing Multi Gage | Introducing_Multi_Gage.htm
Getting Started: Multi Gage Tutorial | Getting_Started_Gage_Tutorial.htm
Using Your Multi Gage Arm | Using_Your_Multi_Gage_Arm.htm
Multi Gage Settings | Multi_Gage_Settings.htm
Multi Gage Interface | Multi_Gage_Interface.htm
Dimensioning Features | Dimensioning_Features.htm
Measuring Features | Measuring_Features.htm
Constructing Features | Constructing_Features.htm
Using Gage Mode | Using_Gage_Mode.htm

[Using Your Multi Gage Arm]
Using Arm as Mouse Mode | Using_Arm_as_Mouse_Mode.htm