If
you have problems using the Inspection Planner commands inside PC-DMIS,
ensure that there is an InsPlan.dll file located in the directory
where you installed PC-DMIS.The following topics describe how to use the functionality added to PC-DMIS to automatically create a part program from your Inspection Plan. To create your part program you need to do the following:
Import the Inspection Plan you exported from your CAD package.
Ensure that the probe won’t collide with the part by inserting proper move commands.
Once you have completed these simple tasks, you can then execute your imported inspection plan as a newly created PC-DMIS part program.
If
you have problems using the Inspection Planner commands inside PC-DMIS,
ensure that there is an InsPlan.dll file located in the directory
where you installed PC-DMIS.
Inspection Planner Default File (IPD)
You must have an Inspection Planner Default file, or (IPD) to import an Inspection Plan into PC-DMIS. The "Inspection Planner Parameters and Rules" topic provides more information on this file.
The
IP Measure option must be enabled
on your portlock to use the Inspection Planner capabilities that are discussed
in this section.
More:
Inspection Planner Parameters and Rules
Performing the Path Optimization